Saturday, September 11, 2010

Mini milk cartons with crate tutorial

I have had  many requests for this Cricut .cut file. I have really been enjoying all the comments and the traffic on my blog. Yahoo!
I have created my own .cut file, made a few changes that make it work better for me....plus this way it is my own work and I can feel free to share it, free-ly. ;)
So, enjoy the tutorial and feel free to leave me a comment requesting the .cut file. I will send out my version of the cartons with the crate now.
I am loving having these adorable bats on my desk to decorate all my Halloween projects. Aren't they the cutest? I cut these cartons in white just to test the .cut file, but when they came out perfectly I couldn't throw them away. So I inked the edges and added the rectangles of decorative papers to try to make them a tad more spooky.

This is the back side. Again using the brads to close the milk carton tops. The bats wings on the front cover the brad prongs, but still leave them easily open-able and reusable.
Now, on with the tutorial....which is picture heavy. Sorry.

Here we are scoring at .5, 1.5 and 3.5 inches.




Flip the .cut and score at 1.5, 3, 4.5 and 6 inches.




In this photo, I know its hard to see but I am trying to show the beginnings of the gable end of the milk carton. So I moved the .cut over to the .25 inch line on the scor-pal and then score just the top .5 inch section at the 2.5 and 5.5 inch lines.



Here the .5 inch marks are clearer. Now we rotate the .cut and starting at the bottom of the .5 inch score I feel around with my finger nail and attempt to get the angled line out to the corner (as seen above).



Rotate and repeat for the other angled score line. This is the most difficult part, trust me. From here it's all gravy baby.


Now we just fold all the scores, making crisp lines.

Use your favorite strong tape on the .5 inch tab along the side and tape the 3 sides of the bottom tab closest to the side tab.

I think the easiest way to line up the side is to fold the taped edge over to the center, then lay the opposite side over on top of the tape. Seems to work out nicely for me. Now fold in the two shorter tabs on the bottom, then fold in the taped tab and finally press the final tab down onto the tape. I use the handle end of my small Fiskars scissors to reach down inside the mini milk carton and press the bottom to ensure the tape is well adhered.
Now we start on the crate. Its quick and simple.

Score at 1 and 2.5 inches.

Flip and score at 1 and 4 inches. (Sorry, I have no idea why this photo won't load rotated to the correct orientation....its me, not you. But its late and I'm too tired to fuss with it. Please forgive me.)

I only add tape to the outer edges of the tabs. This lil crate really doesn't need any more tape then that.


This is the long .cut that makes the handle for the crate. I attempt to center the ovals and then score evenly between them. Then I add tape, 1 stripe above the oval and 1 stripe below the oval.

Then fold the handle .cut in half, sealing the tape together. Score at 4.5 inches. Pressing a bit harder so that you crease through both layers.

I fold both tabs back to make a nice crease again. Then laying 1 tab back against the handle, see above. I run tape along both outer edges of the bottom tabs. Oy, as I read back through these they sounds so confusing.....I really do hope the pictures help.

To get the handle lined up properly I place a mini milk carton against the handle, folding the bottom flat underneath the carton and set it down in the base, with the carton snug up against the side. Then I test it by adding in the other carton, just to make sure they both fit. Its a tight squeeze. I have found that on the base as I am scoring and then creasing the scores if I score a little wide rather then exactly on the line, its a little more roomy with the cartons and the layers of decorative papers and all.
Wow, sorry for the long post. I hope this helps. I hope you enjoy playing around with them as much as I have. So many holidays, so easy to decorate these to fit all of them!
Find inspiration everywhere! Go... Create something fun & fabulous. Enjoy!

15 comments:

  1. Hello - This is a very cute project you have created and your tutorial is great. I am a very visual person and I understand things much better when I can see them. Would you please email the cut file. I would really appreciate it. Thanks. My address is
    pm_cunning@yahoo.ca


    Pat

    ReplyDelete
  2. I love your whopper cartons and would love the cut file. If possible I would also like the little carton cut file too. I really like that you only have to have two cartons instead of four. PS your scrap cards are great. please send to: perkins94@sbcglobal.net

    ReplyDelete
  3. OMG THIS IS GREAT I WOULD LOVE TO HAVE THE CUT FILE ON THIS AND THANK YOU FOR SHARING. I AM BECOMING A FOLLOWER TOO. GREAT BLOG!
    terryim4841@yahoo.com
    tmorrowstreasures.blogspot.com

    ReplyDelete
  4. Thank you for sharing, I would love the file by the way you have a great blog.

    talumar at sbcglobal dot net

    ReplyDelete
  5. Great blog. Glad I stumbled upon it. I would love to have the cut file for the milk cartons. Also loved the halloween scrap cards.
    My email is scrapbook70123 at att.net.
    Thanks.

    ReplyDelete
  6. Please send me the cut file for the milk carton! Thanks for all your hard work!
    Jenni

    jschnearle@ameritech.net

    ReplyDelete
  7. Love the super-sized milk cartons! Could you please send me the .cut file? Thanks!
    trentfamily@gmail.com

    ReplyDelete
  8. This is wonderful and I love your version. Could I please have a copy? I will definetly be coming back to your blog.
    Donnabischof@yahoo.com

    ReplyDelete
  9. This is a neat box. Thanks for the instructions also. I would love to have your cut file. Thanks in advance..

    bobbi
    GRAMMIZ_1@YAHOO.COM

    ReplyDelete
  10. I would be so thankful for both mini and bigger milk carton cut files. Thanks, Sheri
    JLekan@gmail.com

    ReplyDelete
  11. These milk cartons are too cute. They would make great gifts. I would love to have the cut files.
    Thanks for sharing!
    Ashlee
    aberg@alumni.lsu.edu

    ReplyDelete
  12. I love this. What a great idea. I would love this file please

    kermetta3167@yahoo.com

    ReplyDelete
  13. I found your blog when I googled cut file for mini milk crate. wow!! I love your blog and your project. I would love the cut file for this please:-)
    ikennic at q dot com
    happy new year!!

    ReplyDelete
  14. These are so cute too! You are very talented. I would love to have the large and the small file cut file for the milk cartons. Thanks, Debbie yohed@casscomm.com

    ReplyDelete
  15. fab cartons, I would love a copy of your cut file

    ReplyDelete

I enjoy reading each and every comment. Thanks for taking a moment to leave an opinion or observation.

Related Posts Plugin for WordPress, Blogger...